Palo updates

Showing results for 
Show  only  | Search instead for 
Did you mean: 
Please sign in to see details of an important advisory in our Customer Advisories area.

Palo updates

Not applicable


I have just setup my Palo but it cant access any of the update servers, i have a security rule which is source trust zone des untrusted

my trusted zone is on a 10.x.x.x range

my un-trusted which connect to the isp router is a 213.x.x.x range,


L3 Networker

Hi notleyhigh.

PAN device would access update-server using MGT interface is default.

You should check that your MGT that access the internet or look up a DNS server that you configured or connect




L5 Sessionator

All the updates by default are through management interface unless you have configured a service route. If you are using the management interface, make sure it can reach the internet and also the DNS can resolve the

If you are using a layer 3 data plane interface, make sure it can reach the internet and can also resolve the To ensure pings are successful, enable ping using the management profile.

Got it fixed now move the management ip to local LAN and point it at the correct gateway.



No need to move the management to dataplane.

Instead go to Device -> Setup -> Services and click on Service Route Configuration and change so just the updates goes through that dataplane interface.

  • 4 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!