Content translations are temporarily unavailable due to site maintenance. We apologize for any inconvenience.
12-29-2024 09:56 AM
Hi everyone,
Greetings!
I’m currently using OpManager to monitor a Palo Alto firewall in an HA Active/Passive setup, and the Link State of the interfaces on the passive device is set to auto.
While OpManager is able to correctly pull interface details from the active firewall, I am experiencing issues with the interface status of the passive firewall. The interface status for the passive firewall is showing as down in OpManager, while the GUI on the actual firewall shows the interface as up.
Are there any changes I can make in the firewall configuration to ensure that OpManager can fetch the interface details from the passive firewall correctly?
Any insights on this issue would be greatly appreciated.
Thanks in advance!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
