I am configuring 2 PA 2020's for a customer and am having the following problems w/the HA pair once built. Has anyone came across this issue?
***** Text below was sent to my internal technical team *****
I have HA setup, configured and the failover active/passive tested okay w/no issues. However the synching of the running config is having issues. The below output is from the Active box when I manually push the running config the other box.
Is the technician syncing from the UI first and is that also failing with the same output? Just confirming that the following command is being executed on the Active device if syncing from UI is not working:
pantac@PA-4050> request high-availability sync-to-remote running-config
Yes, I have tried running the command from the Active firewall and it failed. I just did a maintenance mode recovery and now the 2 boxes are in Sync. Let's see if it stays in sync over the course of this day as I am still in the process of building out their configuration.
Thanks for your resonse,
Okay the HA pair is not syncing again... Here is what I get when I run the command manually
Server error : Failed to synchrnize running configuration
Would you mind calling into Support to get further assistance with this issue? We'll do a better job of root cause analysis if we can obtain logs and perhaps a gotomeeting session as well.
After working w/support and their developers yesterday afternoon the issue w/our HA issue appears to be a bug and should be fixed within the next few weeks.
Thanks Steve @ Palo for your help yesterday!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!