- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
10-21-2014 02:13 AM
Hello All
Out of the box, my 3050 Firewall had PAN OS 5.0.x and I wanted to upgrade it to.the latest 6.0.5 release. My Firewall does not have internet access yet, and so all the following things were done offline by downloading files on my laptop.
So, I updated Application and Antivirus signatures, uploaded the base image of 6.0.0 to the firewall and then tried to upload the image 6.0.5 to Firewall. It gave me "Operation Failed" notification. Nevertheless, I clicked "Install from file" and I could see the PAN OS 6.0.5 file.
I clicked install. Again after some time, it gave me the "Operation Failed" notification with description "No information available". However, I simply restarted the firewall, and when it came up, the IOS was indeed upgraded to 6.0.5.
Has anyone had such an experience?
Is there any known cause for such a thing?
Thanks a lot!
Amit
10-21-2014 07:22 AM
Hi Amit,
Its difficult to provide root cause as issue already happened. Practically it should not happen.
Following document provides information on manual upgrade, let me know if you have tried something different than this.
How To Manually Import and Install PAN-OS from the CLI
Regards,
Hardik Shah
10-21-2014 09:46 AM
Hi!
Try to install 6.0.0 version first
Regards,
Alex
10-21-2014 10:03 AM
Hello Amit,
You can also run the following command and see what it shows:
> debug swm status
Partition State Version
--------------------------------------------------------------------------------
sysroot0 REVERTABLE 6.0.0 <<<< Here you need to see whatever previous version you had
sysroot1 RUNNING-ACTIVE 6.0.4 <<<<Here you need to see 6.0.5
maint READY 6.0.4
You can also see the info in the system logs when the device was rebooted. You will see "Management server started. Running version 6.0.5"
If you do not want to take any chances, you can install 6.0.0 and then upgrade to 6.0.5 so that you can be sure of this.
-Dileep
10-22-2014 12:57 AM
Thank you all of you for your answers!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!