Pan(w)achrome - interface speed differences
cancel
Showing results for 
Search instead for 
Did you mean: 

Pan(w)achrome - interface speed differences

Not applicable

Hello,

I just started using Pan(w)achrome, version 0.7.1.5.

So far, it has some useful information.

I am trying to figure out why I have such a difference between my external interface receive rate (1.3+ Gbps) and my internal interface transmit rate (~300 Mbps).

The internal receive and external transmit have the same bitrate (packet rate is off by about 1%).

I understand that inbound I am blocking traffic and that would account for some difference in the rates, but this seems like a big drop.

Is there a way to see a blocked rate of traffic (rule and/or threats) ?

Thanks!

2 REPLIES 2

L7 Applicator

Hello Craig,

I would recommend you to implement QOS on this PAN firewall to monitor the actual bandwidth. You may compare the value between Pan(w)achrome and QOS.

QoS in PAN-OS 4.1

Thanks

For that, the following document may be useful

Graphic Traffic Monitoring for Interfaces - QoS Statistics

Your packets may be exiting different interfaces.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!