12-17-2018 10:56 AM
We have M100 in active and PAssive mode.
Did failover where active was suspended and passive M100 became active
Check the firewall it still shows connected to Suspended PAnorama and it is active one from FW point of view?
is this by design?
12-31-2018 01:08 AM
If possible the firewalls always maintain a connection to both panoramas (if you have configured both panorama servers in the firewall configuration). So in case of a failover panorama sends a notification to the firewalls to tell them about the new situation. Where does your firewall show that it is only connected to the suspended panorama?
12-21-2018 07:46 AM
Need to confirm if Active PAnorama gets suspended the PA which is connected to it will still show that M100 as activ one?
Suspended status of M100 is between Panorama only and it has no impact on the connection of the PA to Panorama?
12-24-2018 08:24 AM
Anybody can answer this please?
12-30-2018 10:34 PM
Anybody can answer this please?
12-31-2018 01:08 AM
If possible the firewalls always maintain a connection to both panoramas (if you have configured both panorama servers in the firewall configuration). So in case of a failover panorama sends a notification to the firewalls to tell them about the new situation. Where does your firewall show that it is only connected to the suspended panorama?
12-31-2018 10:16 AM
Normally I do show logging status from firewall to check the status.
But during this failover for Panaroma I did not run the show logging status on any Firewall
But later I checked the system logs during that time frame on both Panorama and Firewall it does not show that connection to the Panorama changed from any of the firewall?
Is system logs right place to check or i should have run the sh logging status on the Firewall during the time of failover?
01-15-2019 06:59 AM
Yesterday i did Panorama upgrade and saw that when you run command
show panorma status
IT shows the Right status of PA with PAnorama.
you were spot on.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
