Panorama: is there a way to limit to device access within Web GUI
cancel
Showing results for 
Search instead for 
Did you mean: 

Panorama: is there a way to limit to device access within Web GUI

L2 Linker

Hello,

Our Panorama has set up with several PAN devices like 500s 4020s and 4060s. Just want to clarify one thing.

Within the Panorama Web GUI, is there a way to set up that only a couple staff in the Central Operation Center able to access all devices while limit remote staff with only their local assigned device ?

I know that the remote support staff always able to access their PAN directly.

Thanks for your response.

Leo

1 ACCEPTED SOLUTION

Accepted Solutions

L4 Transporter

In the PANORAMA 3.0.x this wasnt possible however in 3.1.x you have this option. when you create your admin users you can select the devices they will have access too limiting their view to devices of your choice.

View solution in original post

2 REPLIES 2

Not applicable

I had the same need. In Panorama - under the Panorama tab,  i created device grouping under the device groups section.. then when i created users, i assigned them to specific device grouping..

L4 Transporter

In the PANORAMA 3.0.x this wasnt possible however in 3.1.x you have this option. when you create your admin users you can select the devices they will have access too limiting their view to devices of your choice.

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!