- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
03-10-2018 11:18 PM
Hi,
I dont have any data to display in this new feature at panos 8.1
I have one panorama M100 and two PA5050 and two PA3020 all in 8.1 off course i see de fw at summary perfect.
03-11-2018 04:11 PM
Hi @BPry
The solutions are in konw issues of 8.1 PAN-94135 with a simple command.
thank you very much to all.
03-11-2018 08:01 AM
What is it that you're looking for?
Are you trying to use panorama to display to "status" of attached firewalls? Where statuses are things which could have an "impact" to the operation of the firewall?
03-11-2018 08:19 AM
Hi @egistau
In the documentation I cannot find something that you need to configure in order to have this informations available. Simply add a 8.1 firewall to a 8.1 panorama and it should work to view the health statistics on the managed devices pages ... https://www.paloaltonetworks.com/documentation/81/panorama/panorama_adminguide/manage-firewalls/devi...
Regards,
Remo
PS: you either have a lot of lab devices or you are really brave to upgrade already to 8.1 😛
03-11-2018 08:22 AM
I recommend that you take a look at 8.1.0 release documentation, specifically bugs
PAN-91946
PAN-90736
PAN-51122
and see if you could be running into any of these specific issues that are known in 8.1.0.
I'm also going to recommend that you consider rolling back from 8.1.0, specifically on your M100, at this moment in time. If you take a look at that same exact document and run through the rest of the documented issues, the vast majority center around Panorama. 8.1.0 is fresh, and as such holds a lot of known issues and will continue to see new issues get added for the next little bit as more people deploy it. If this is production equipment I would suggest possibly holding off on 8.1.0 just yet, until you've reviewed all the known issues and decided that it'll actually work perfectly fine for your enviroment.
03-11-2018 02:49 PM
Hi Brandon
In Pan-os 8.1 can now track resource utilization, environmental conditions, and other key operational metrics over time and in bulk across large deployments.
This feature its nice for me.
thanks for answer.
03-11-2018 02:54 PM
Hi @Remo
Yes i read a lot documentation, the feature its simply, but not working in my Panorama.
I have only one lab device, we upgrade Panorama and four FW with 0 problems.
Thanks for answer
03-11-2018 03:15 PM
Hi @BPry
I read de issues:
PAN-91946 My problem its similar, in this case yo see the device and have false positve, my case its device list its empty. (attach photo with empty list and list of FW conected to panorama)
PAN-90736 empty list again
PAN-51122 I have two VM FW but in 8.x version
Thanks a lot for you recommendations, the other features of my panorama work fine.
03-11-2018 04:11 PM
Hi @BPry
The solutions are in konw issues of 8.1 PAN-94135 with a simple command.
thank you very much to all.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!