Panorama not receiving logs after rebuilding with new OVA

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Panorama not receiving logs after rebuilding with new OVA

L4 Transporter

We had to rebuild Panorama from new OVA file. It is on version 9.0.8 and running on vmware.

Firewalls are all in-sync

 

 

This is the disk status on panorama

adm-rajrupindertoor@Panoramanv1> show system disk-space

Filesystem Size Used Avail Use% Mounted on
/dev/root 8.0G 3.4G 4.3G 45% /
none 7.9G 68K 7.9G 1% /dev
/dev/sda5 24G 9.3G 14G 41% /opt/pancfg
/dev/sda6 6.0G 1.8G 4.0G 31% /opt/panrepo
tmpfs 7.9G 110M 7.8G 2% /dev/shm
cgroup_root 7.9G 0 7.9G 0% /cgroup
/dev/sda8 32G 798M 30G 3% /opt/panlogs
/dev/loop0 9.9G 151M 9.2G 2% /opt/logbuffer
/dev/sdb1 1.7T 77M 1.7T 1% /opt/panlogs/ld1

 

On panorama this command shows all as N/A

show logging-status device Serial

 

Type Last Log Rcvd Last Seq Num Rcvd Last Log Generated


Source IP : Default
Destination IP : cms0
Source Daemon : logrcvr
Connection Id : 0123456789-log-collection-lr-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A

Source IP : Default
Destination IP : cms0
Source Daemon : mgmtsrvr
Connection Id : 0123456789-log-collection-ms-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A

gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A

 

 

Error message on firewalls when old panorama was shutdown.

opaque: FW has lost connection to panorama, no log will be forwarded

 

Also on panorama log storage setting shows only this much space, although 2TB disk is attached(Thin provisioned), sdb1 in output above

 
 

image.png

2 REPLIES 2

Cyber Elite
Cyber Elite

@raji_toor you need to add the serial number of the firewall after that command

>show logging-status device Serial 000123456789

 

Your log partition is fine: 

/dev/sdb1 1.7T 77M 1.7T 1%

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

@reaper Yes it is with serail. My mistake i removed serial from last pasted output

 

r@Panoramanv1> show logging-status device 0123456789

Type Last Log Rcvd Last Seq Num Rcvd Last Log Generated


Source IP : Default
Destination IP : cms0
Source Daemon : logrcvr
Connection Id : 0123456789-log-collection-lr-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A

Source IP : Default
Destination IP : cms0
Source Daemon : mgmtsrvr
Connection Id : 0123456789-log-collection-ms-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A

  • 2880 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!