- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
05-19-2020 03:03 PM
We had to rebuild Panorama from new OVA file. It is on version 9.0.8 and running on vmware.
Firewalls are all in-sync
This is the disk status on panorama
adm-rajrupindertoor@Panoramanv1> show system disk-space
Filesystem Size Used Avail Use% Mounted on
/dev/root 8.0G 3.4G 4.3G 45% /
none 7.9G 68K 7.9G 1% /dev
/dev/sda5 24G 9.3G 14G 41% /opt/pancfg
/dev/sda6 6.0G 1.8G 4.0G 31% /opt/panrepo
tmpfs 7.9G 110M 7.8G 2% /dev/shm
cgroup_root 7.9G 0 7.9G 0% /cgroup
/dev/sda8 32G 798M 30G 3% /opt/panlogs
/dev/loop0 9.9G 151M 9.2G 2% /opt/logbuffer
/dev/sdb1 1.7T 77M 1.7T 1% /opt/panlogs/ld1
On panorama this command shows all as N/A
show logging-status device Serial
Type Last Log Rcvd Last Seq Num Rcvd Last Log Generated
Source IP : Default
Destination IP : cms0
Source Daemon : logrcvr
Connection Id : 0123456789-log-collection-lr-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A
Source IP : Default
Destination IP : cms0
Source Daemon : mgmtsrvr
Connection Id : 0123456789-log-collection-ms-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A
Error message on firewalls when old panorama was shutdown.
opaque: FW has lost connection to panorama, no log will be forwarded
Also on panorama log storage setting shows only this much space, although 2TB disk is attached(Thin provisioned), sdb1 in output above
05-20-2020 09:42 AM
@raji_toor you need to add the serial number of the firewall after that command
>show logging-status device Serial 000123456789
Your log partition is fine:
/dev/sdb1 1.7T 77M 1.7T 1%
05-20-2020 11:29 AM
@reaper Yes it is with serail. My mistake i removed serial from last pasted output
r@Panoramanv1> show logging-status device 0123456789
Type Last Log Rcvd Last Seq Num Rcvd Last Log Generated
Source IP : Default
Destination IP : cms0
Source Daemon : logrcvr
Connection Id : 0123456789-log-collection-lr-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A
Source IP : Default
Destination IP : cms0
Source Daemon : mgmtsrvr
Connection Id : 0123456789-log-collection-ms-cms0-def
Log rate: 0
config N/A N/A N/A
system N/A N/A N/A
threat N/A N/A N/A
traffic N/A N/A N/A
hipmatch N/A N/A N/A
gtp-tunnel N/A N/A N/A
userid N/A N/A N/A
iptag N/A N/A N/A
auth N/A N/A N/A
sctp N/A N/A N/A
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!