Panorama policies pushed to HA peer

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Panorama policies pushed to HA peer

Not applicable

I've got an HA A/P pair where the primary is included in a device group and managed via Panorama.  The configs are sycnhed and everything is matched; however, the peer has no inherited policy from Panorama.  Any ideas?

1 accepted solution

Accepted Solutions

L6 Presenter

You have to connect your HA peer also to the panorama and push policies to both of your peers from the panorama.

- Sandeep T

View solution in original post

4 REPLIES 4

L6 Presenter

You have to connect your HA peer also to the panorama and push policies to both of your peers from the panorama.

- Sandeep T

Sandeep, thanks!  I tried this several times.  Added it to the device group and pushed to the device only not the entire device group.  Would this matter?

Would something in the HA config prevent the backup from getting policy from Pano for some reason?

Hi Erich,

Panorama pushed policies are not synchronized by HA between the peers.  You will need to put both devices in the same device group in Panorama and then always push policies to the device group, or manually push the same policies to both devices of the HA pair.

Thanks,

-- Kevin

Thanks!  I got it working.

  • 1 accepted solution
  • 3304 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!