02-02-2013 06:00 AM
Hi,
I have installed a PA200 with PanOS 5.0.2 and on-device User-ID agent. I have connected my device on a network with a DC Windows 2008R2 and I have configured User Mapping and Group Mapping Settings as explained in the Getting_Started_Guide_PanOS 5.0 document, but in the Server monitoring tab the status stays on "Not connected". The MGT interface is on the same LAN as the DC and I have turned off the firewall policies on the server. What can I do to troubleshoot this problem ?
Thanks.
LA
02-02-2013 11:34 AM
Confirm the configurations using KB How to Configure Agentless User-ID in PAN-OS 5.0.x.
For checking connectivity from the Management port
CLI command:
>ping host <ip of DC> .
02-02-2013 11:34 AM
Confirm the configurations using KB How to Configure Agentless User-ID in PAN-OS 5.0.x.
For checking connectivity from the Management port
CLI command:
>ping host <ip of DC> .
02-04-2013 07:03 AM
Thank you,
I confirmed the configuration using the KB-doc you suggested me and now the WMI connection from appliance and DC is working.
Bye.
LA
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
