Path Monitoring for Auto Fail over between 2 ISP but it is not working

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Path Monitoring for Auto Fail over between 2 ISP but it is not working

L4 Transporter

I recently configured Path Monitoring for Auto Fail-over between 2 ISP but it is not working. Primary route is not removing from the routing table even when destination IP is unreachable

ISP-1: x.x.x.x

ISP-2: x.x.x.x


I have configured both interface on single zone so that single policy applies then I configure Path monitoring. I am using single Virtual Route Domain and static route


Issue Category : Network/Routing

Firewall : PA-5020 HA

OS Version : 8.1.10


L2 Linker

Use 2 VR, looks a little bit more complicated but working like a charm.




  • 1 replies
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!