PBR Monitoring

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

PBR Monitoring

L2 Linker

Hi,

In Forwarding tab under PBR forwarding rule, what interface usually Ping or monitor the IP Address in Monitor option?

Thanks,

MBS

5 REPLIES 5

L0 Member

Hi MBS,


It should be interface used to reach that IP address and taken from the routing tabel.

L5 Sessionator

Hi mbs.admin ,

Monitoring traffic is sourced from the forwarding egress interface PBF. This interface will ping the next hop. You can follow following documents :

Where is Policy Based Forwarding (PBF) Monitoring Traffic Sourced From?

Hope this helps. Thank you.

L7 Applicator

A similar discussion thread for your reference: PBF and failover

Thanks

L6 Presenter

Hi MBS,

It takes egress interface of PBF rule. In this case its Circuit Bs Egress interface. Kindly refer following diagram.

Where is Policy Based Forwarding (PBF) Monitoring Traffic Sourced From?

Regards,

Hardik Shah

L0 Member

Hi MBS,

Egress interface of the PBF rule will be used for monitor option. Please find the below doc for the same.

https://live.paloaltonetworks.com/docs/DOC-6049

Regards,

Sarath

  • 3438 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!