- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
11-12-2014 02:59 AM
Hi,
In Forwarding tab under PBR forwarding rule, what interface usually Ping or monitor the IP Address in Monitor option?
Thanks,
MBS
11-12-2014 03:26 AM
Hi MBS,
It should be interface used to reach that IP address and taken from the routing tabel.
11-12-2014 05:18 AM
Hi mbs.admin ,
Monitoring traffic is sourced from the forwarding egress interface PBF. This interface will ping the next hop. You can follow following documents :
Where is Policy Based Forwarding (PBF) Monitoring Traffic Sourced From?
Hope this helps. Thank you.
11-12-2014 05:22 AM
A similar discussion thread for your reference: PBF and failover
Thanks
11-12-2014 06:16 AM
Hi MBS,
It takes egress interface of PBF rule. In this case its Circuit Bs Egress interface. Kindly refer following diagram.
Where is Policy Based Forwarding (PBF) Monitoring Traffic Sourced From?
Regards,
Hardik Shah
11-12-2014 12:04 PM
Hi MBS,
Egress interface of the PBF rule will be used for monitor option. Please find the below doc for the same.
https://live.paloaltonetworks.com/docs/DOC-6049
Regards,
Sarath
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!