- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
07-02-2013 06:20 AM
Hello,
i want to make a policy for "Policy Based Forwarding" to route only ping traffic to a different router. Is this possible?
I testet a rule with a service "tcp/udp Port 0" -> Don't work
I tested another rule with an application "icmp" -> Don't work
For testing suppose i create anoher rule with service "any" and application "any": This rule matches and the traffic was routed over the different router.
But this is not a possible conclusion for my problem, because i only want pings to go to the other router.
Best Regards,
Arne
07-02-2013 09:27 AM
PBF policies get matched when the firewall does the forwarding look-up based on the five tuple information gathered on receipt of a packet. Hence only applications that can easily be identified based on layer 4 information that are not dynamic in nature can be effectively used in a PBF rule.
07-02-2013 12:33 PM
yes but you cannot choose ping with pbf rule.in pbf app list is different.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!