11-13-2019 12:33 PM - edited 11-13-2019 12:34 PM
We have PA user id agent running on the windows server.
Need to confirm Port used by the User id agent to talk to AD for user to ip mappings
is this port tcp 5006?
where should i look for?
11-13-2019 02:56 PM
Hello,
By default, its port 5007. It will initiate from the client/server to the PAN on the management interface. You should be able to see it connect if you go to the Device tab -> User Identification ->User-ID agent subtab. The ball should be green. Also if you have the local firewall turned on on the server, make sure you are allowing port 5007/tcp outbound.
Regards,
11-13-2019 03:13 PM
Think the question was what port the UserID agent uses to talk to AD (not the Palo).
UserID to AD servers port usage is referenced here:
11-13-2019 06:40 PM
I have gone through that link so need to confirm if port used is 5006?
11-13-2019 06:41 PM
Thanks for replying.
Need to confirm port used between user id agent running on Windows server and AD?
11-15-2019 03:45 AM
Our Windows based user agents are using TCP 445 to all our DC's.
11-16-2019 09:03 AM
how can I verify that from user id agent running on windows server?
11-16-2019 11:06 AM
On the windows server run a command prompt and use
netstat -an
look for established connections from agent server to ad server,
11-16-2019 11:37 AM
Will try that
11-24-2019 09:01 AM
Tested it is using port 445.
Thanks for help
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
