Predefined reports with several Virtual Systems

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Predefined reports with several Virtual Systems

L3 Networker

Hi all,

 

We have a Firewall divided in two vsys and we are having problems with the configuration of some reports. When you try to generate a new "PDF Summary" and you have selected the virtual system "Shared" there are available some predefined reports that are shown as charts. However, if we select an individual virtual system there are not predefined reports. Is it possible to create them? Because we cannot find how to create new reports in a format different from a table (pie chart, line chart, bar chart...).

 

I hope you can help me with this. Many thanks in advance.

Marcos.

1 accepted solution

Accepted Solutions

L6 Presenter

Hi there...The predefined reports are generated from logs of both VSYS'es as that is the default.  When you select a vsys=vsys1, then you are asking to see logs from that single vsys1 only and not vsys2 so the firewall does not show the pre-defined reports.  You can create custom reports for vsys1 and add a daily schedule to generate the custom reports and then define a PDF summary report from these custom reports.  Thanks.

View solution in original post

1 REPLY 1

L6 Presenter

Hi there...The predefined reports are generated from logs of both VSYS'es as that is the default.  When you select a vsys=vsys1, then you are asking to see logs from that single vsys1 only and not vsys2 so the firewall does not show the pre-defined reports.  You can create custom reports for vsys1 and add a daily schedule to generate the custom reports and then define a PDF summary report from these custom reports.  Thanks.

  • 1 accepted solution
  • 2745 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!