Problem adding zone to tunnel

Reply
Highlighted
L1 Bithead

Problem adding zone to tunnel

I'm trying to add a zone to a tunnel interface. I can create the tunnel and configure it via panorama defining virtual router, vsys and zone to be applied via template. But when I check the devices where it should be applyed  both zone and virtual router are defined as "none" for the tunnel even though Panorama is showing the configuration I want for the same tunnel. Panorama gives me no warnings when pushing the configuration. The zone I'm adding is already attached to another tunnel, is that a problem?

Cyber Elite

Hello,

You can have multiple interfaces in one zone but an interfave can only be in one zone. Are you using template stacking? Maybe check the order of how they are being applied?

 

Just some thoughts.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!