10-18-2018 05:24 AM
Hello
We have 3CX server - IP telephony inside the network.When we pass the SIP traffic through PA it gets problems
We try to connect through SIP :5060 port o outside server on ISP side but it doesnt work
we made application override and also disabled ALG
It is natted also by PA itself
have you ever some problems regarding SIP?
10-18-2018 11:48 AM
Hello,
I would just make sure you have all the proper policies in place to allow the traffic. Also check and see if any traffic is getting blocked. Place a DENY ALL policy at the bottom of your list and make sure its set to log at session end. Also take a look at the Session Browser as UDP traffic has to time out before it gets logged at session end.
Regards,
10-18-2018 02:29 PM
In addition to what @OtakarKlier said, what are you overriding the application to. Unless you are using a cutom app-id things won't behave as you would expect as the traffic is still analyzed if you select a pre-built app-id.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
