07-12-2017 02:01 AM
Hi all,
One of our resellers has reported a problem to us. A condition, configured in a Traps environment, is not working anymore after they updated from version 4.0.0.24417 to 4.0.1.25216. Is there something known about this problem?
This is the condition:
Could someone help with this?
Thanks and Regards,
Federico
07-12-2017 06:59 AM
The condition looks fine to me so it should be working. I don't believe this is a known Traps issue but you might want to also put to into the specific Traps discussion forum to see if you can't get an answer in there faster. When it comes to Traps I usually recommend engadging an SE whenever you run into an issue as they can usually get you in contact with an engineer specific to Traps in short order.
07-12-2017 07:05 AM
Hi,
Ok, will check with our SE's.
Thanks and Regards,
Federico
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
