- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
03-07-2022 06:10 PM
Hi All,
I would like to enable QoS on an IPSec tunnel. The tunnel is carrying mostly voice and signalling traffic.
If the voice traffic has a marking, eg EF, will this marking be copied to the outer IP header (the IPSec tunnel header)?
Or, will I have to create a separate QoS policy, which prioritises IPSec traffic as it egresses the physical internet interface?
Thanks
03-28-2022 05:38 PM
Hello there
Is the VPN excluisvely for voice and signalling, or will there be other traffic also passing through the VPN.
You can set up QoS which is prioritize the traffic INSIDE of the VPN, over non voice traffic.
But as for prioritizing IPSec traffic, I do not think this is the ideal design.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!