I have 24 VSYS on the Firewall,
All of them are using the same physical interfaces for incoming and outgoing traffic but different sub-interfaces.
I have decided to apply the QoS profile for egress traffic. As I know I can apply the QoS on the physical interface.
My question, how can I configure a dedicated QoS profile using only the sub-interface or apply it to a specific Vsys?.
Firewall Model PA-5000 series.
Solved! Go to Solution.
No, it does not appear in the source Interface tab
PA KB, QoS is supported on physical interfaces and it's depending on the firewall model, QoS is also supported on sub interfaces and Aggregate Ethernet (AE) interfaces.
I m not sure about PA50505 series
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!