So I have two questions regarding PAN QoS when you use class 1 (or any class) and configure it with a priority of "real-time".
1) I assume Real-Time makes it a priority queue. Is it a STRICT priority queue? (Meaning that whatever you set that rate for, if there's more of that type traffic than what the rate is, even if THERE IS available bandwidth, the excess rate will be dropped?
2) Does QoS queuing ONLY get engage when the interface is congested?
What the difference between 'real-time' and 'high' priority than? Will there be any difference under similar circumstances when you have 100 Mbit/s MAX egress and 50 Mbit/s guarantee, while actual traffic matching this class exceeding 100 Mbit/s? Previously I was under impression that real-time one will just drop traffic exceeding queue limit and anything else will just reclassify everything above to default class 4.
Is this correct assumption?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!