06-01-2023 06:47 AM
Hi,
We recently deployed Palo Alto and I notice that its blocking qualys scan on my internal network for the traffic passing through the Palo Alto vwire. How can allow all qualys traffic to pass through the Palo Alto?
06-01-2023 09:57 AM
Hello,
You will need to create a security policy to allow the traffic from the scanner's IP address. Something like
Source Zone (the zone the scanner is in) - Source Address (IP of the scanner(s) ) - Destination zone and address (can be specific or just any) - ANY application on ANY service. then no security profiles but enable logging at sesstion end.
Please make sure to not use an external scanner as you may inadvertently open your network to the internet.
Hope this helps.
06-01-2023 09:57 AM
Hello,
You will need to create a security policy to allow the traffic from the scanner's IP address. Something like
Source Zone (the zone the scanner is in) - Source Address (IP of the scanner(s) ) - Destination zone and address (can be specific or just any) - ANY application on ANY service. then no security profiles but enable logging at sesstion end.
Please make sure to not use an external scanner as you may inadvertently open your network to the internet.
Hope this helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
