Query on HA1 link

Reply
Highlighted
L4 Transporter

Query on HA1 link

Hello,

 

We have an Active-Passive setup. The HA1 link in the Active unit shows down (red) if the Link settings are set to auto/auto.

If I change the settings to 100mb link, full duplex and link state to up, the port shows up (green).

Shouldn't it work in auto/auto settings as well?

 

Auto.pngFull.png


Accepted Solutions
Highlighted
Cyber Elite

@FarzanaMustafa,

It should work in auto/auto as long as the cable is okay and the settings are the same on each setup. I'd also recommend changing out the cable between the two and seeing if that fixes things. 

View solution in original post


All Replies
Highlighted
L2 Linker

Can we assume that HA1 on one device is plugged in directly to HA1 on the secondary? If so I also assume you  have replaced the cable just in case there is a cable issue?

 

I use the dedicated HA ports on mine but they are all set for auto/auto

Highlighted
Cyber Elite

@FarzanaMustafa,

It should work in auto/auto as long as the cable is okay and the settings are the same on each setup. I'd also recommend changing out the cable between the two and seeing if that fixes things. 

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!