Query on IKEv2 Phase2 parameters

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Query on IKEv2 Phase2 parameters

L2 Linker

Hello,

 

We are thinking of peering Cisco ISR G2 Router with PA-VM (deployed in Azure).

In Cisco, ESP-AES-256 is used for Encryption and ESP-SHA-256 is used for Authentication.

I can see that these two options are not available in PA-VM.

In that case, what should we select in PA-VM so that we can create a site-to-site tunnel with the Cisco peer?

 

Thanks in advance.

1 REPLY 1

L3 Networker

Hi there,

Under Network -> Network Profiles -> IPSec Crypto :

The Palo equivalent would be:

  • IPSec protocol : ESP
  • Encryption: AES-256-CBC
  • Authentication: SHA-256

Although not explicitly referenced in the config, cisco uses CBC. I will see if I can find a command reference/ document.

 

cheers,

Seb.

  • 1636 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!