04-09-2019 10:02 PM
Hello,
We are trying to exclude one IP from including routing in split tunneling.
VPN is working, however, I found that when going to 192.168.16.22, still through VPN rather than local LAN.
What we need to setup is ONLY this range, 192.168.0.0/16, will be accessed via VPN except one particular IP shown below.
Looks like we need to use include and exclude both to achieve this or do we have any other method?
04-10-2019 01:01 AM
perhaps run "route print" on local device to ensure route command has taken.
also... if your /32 host is non routable then it will then try the default (tunnel) route as it just has a higher metric value.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
