Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
06-30-2022 09:59 AM
Hello all,
I'm new her and with Paloalto firewalls.
anyone knows what is the default username and password PANOS vmware I use on GNS3 please.
see below.
Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...
Entry:
Booting 'PANOS (sysroot0)'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core conso
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev
hugepages=0
[Linux-bzImage, setup=0x3c00, size=0x38c710]
cpld cpld.1536: Failed to request region 0x600-0x63f
eth0 Link encap:Ethernet HWaddr 0C:4E:C7:46:00:00
inet addr:192.168.17.131 Bcast:192.168.17.255 Mask:255.255.255.0
inet6 addr: fe80::e4e:c7ff:fe46:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14692 (14.3 KiB) TX bytes:1026 (1.0 KiB)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
