Re: How to Post a LIVEcommunity Discussion

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

Re: How to Post a LIVEcommunity Discussion

L1 Bithead

Hello all,

 

I'm new her and with Paloalto firewalls.

 

anyone knows what is the default username and password PANOS vmware I use on GNS3 please.

see below.

Enter 'maint' for boot menu.
Booting PANOS (sysroot0) after 5 seconds...

Entry:
Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core conso
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev
hugepages=0
[Linux-bzImage, setup=0x3c00, size=0x38c710]

cpld cpld.1536: Failed to request region 0x600-0x63f

eth0 Link encap:Ethernet HWaddr 0C:4E:C7:46:00:00
inet addr:192.168.17.131 Bcast:192.168.17.255 Mask:255.255.255.0
inet6 addr: fe80::e4e:c7ff:fe46:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:160 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14692 (14.3 KiB) TX bytes:1026 (1.0 KiB)

 

1 REPLY 1

L5 Sessionator

Default login for PANW is admin/admin

Help the community! Add tags and mark solutions please.
  • 2750 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!