Real time bandwidth on Ingress and egress Interface

[Joshan_Lakhani]

Iam using QOS and i want to check the real time bandwidth on  Ingress and egress interface. 

[SutareMayur]

@Joshan_Lakhani,

You can see under qos statistics.

Mayur

[Joshan_Lakhani]

Can i Check Previous bandwidth using cli

[SutareMayur]

@Joshan_LakhaniYou can see only real time bandwidth under qos statistics. If you want to check historical traffic on interfaces, you can check it under ACC tab or under monitoring tool like Solarwinds.

Hope it helps!

Mayur

[Joshan_Lakhani]

my internet Link is of 20 MB and as per isp is utilization is 10Mb. But in FW i am see only in 0.5 MB real time traffic can you suggest

[Joshan_Lakhani]

In QOS we only see upload on egress and Download on ingress. Can i check both upload and download on same interface using cli/GUI. or I want to check internet total utilization on egress port.

[OtakarKlier]

Hello,

Your best bet is to use some netflow software and send the PAN netflow to it for this.

Regards,

[Joshan_Lakhani]

Without Using Net flow or any NMS tool can I show real time bandwidth Via Cli on physical interface. 

[Joshan_Lakhani]

I want to see download traffic of two different ISPs so I can identify link saturation, as I have 12 Mbps bandwidth of one ISP and 15 Mbps on second ISP.

For SNMP Option : I am not getting response of SNMP V3 from firewall on NMS Server is paloalto Support Huawei NMS or not