real time interface monitor

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

real time interface monitor

L1 Bithead

I have an interface connected internet line with bandwidth 10MB can i monitor B.w utlization real time , meaning can paloalto draw a graph time and b.w at every moment i can see ultization may 5 MB ..5.1MB 9MB or something like that . or i must use a netflow from paloalto and third party to draw this graph

8 REPLIES 8

Cyber Elite
Cyber Elite

Hi @Ahmed_Fahmy

 

For continuous monitoring you'd need a netflow tool as this would give you historical data.

If you have QoS enabled (not necessarily enforced, simply enabled on the interface) yoiu can also see a graph for the interface, but it only starts the moment you open the graph tool in the webinterface.

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization

But if i do it on outside interface can it give me the download or only give me the upload graph , case I want to montior the internet line utlization . 

 

thanks inadvance

or to be more specifc can i mointor the internet line

L4 Transporter

Pan(w)achrome does some basic graphing for real time troubleshooting. 

 

For more historal reporting, you would need NetFlow or SNMP monitoring. LibreNMS is a popular choice for SNMP monitoring. I believe there's a NetFlow plug-in documented. Setting up SNMP or NetFlow on the PAN is pretty trivial.

 

Depending on your environment and network layout, you would either need to monitor the PAN or the switch where your ISP link and PAN connect. 

Enable QoS on the physical interface you want to monitor.  You don't have to actually create any QoS Policies or anything, just enable it on the interface.

 

Then, when on the Network Tab --> QoS page, you'll see a Statistics link beside the interface name.  Click on that, and you'll get a real-time graph of the last X minutes (where X I think is 2 minutes, but might be 5; definitely no more than the last 10).

Real time monitoring software based on snmp polling: https://github.com/netdata/netdata

L0 Member

How can I monitor physical Interface traffic without tunnel?

L2 Linker

PRTG Free use SNMP traffic sensor, no NetFlow config required.  You'll be up and running in 15 min.

2022-04-05_09-20-45.png

  • 5679 Views
  • 8 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!