Recently just installed expedition in the VMware, however couldn't login to the Expedition via google chrome

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Recently just installed expedition in the VMware, however couldn't login to the Expedition via google chrome

L1 Bithead

Recently just installed expedition in the VMware, however couldn't login to the Expedition via google chrome.

Don't know where to load the google chrome?

6 REPLIES 6

Community Team Member

Hi @wsf7528 ,

 

Enter the "ifconfig" command to view your vnic IP. You can then enter that interface IP into your browser by "https://x.x.x.x".

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Hi Jay,

 

Sorry I am a bit dump, where can I find the chrome? from VM or from my laptop windows?

Please see the attached.

Community Team Member

@wsf7528 no worries! Id double check to make sure that whichever device you are trying https://192.168.206.131/ from is on the same network. If you've verified you are on the same network or can route to 192.168.206.131, can your enter the command "sudo ss -ltnp". Does 443 pop up? If not, there might have been an issue with your download. Id run through the installation again.

 

 

 

 

 

Which installation guide did you use? 

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Hi Jay,

 

No 443, please see the attachment. are you able to provide your screenshot of ifconfig and the windows ifconfig. please also see my attachment.

L1 Bithead

Is it possible to move it to Expedition forum instead of general discussion?

Hi Jay,

 

Is this not appliable to MACbook instead of windows?

  • 991 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!