03-23-2017 06:05 AM
I have a remote user that's setup with an ASA5505 configured for teleworker. They move around and don't always have a static IP address at their locations. It's configured to call home to my ASA5540s and create the tunnel.
My question is if the PA200 has this capability to do the same back to my PA5050?
03-23-2017 06:33 AM
Yes it does and infact it's probably far easier to setup on the PA-200 than on your 5505, or at least for me it is.
03-23-2017 06:33 AM
Yes it does and infact it's probably far easier to setup on the PA-200 than on your 5505, or at least for me it is.
03-23-2017 07:46 AM
Thanks!
Do you happen to have a link to some resources I can read up on this?
03-27-2017 07:41 AM
This should get you going in the right direction. I can give you a direct configuration example if you need it just let me know. I imagine that your teleworker/remote office is not going to have a static IP?
03-27-2017 07:45 AM
Thanks!
You are correct. They have a dynamic IP from their provider.
Jeff
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
