Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Replace 'srcloc' for RFC1918 IPs?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Replace 'srcloc' for RFC1918 IPs?

L0 Member

We are using the 'srcloc' field in our logs, and it's pretty handy for Out-->In traffic.  But for In-->Out traffic, we get the "10.0.0.0-10.255.255.255' value.  This is MUCH too large and a lot less useful.  Is there a way to edit the table so that we use a custom code for RFC1918 addresses instead?

1 accepted solution

Accepted Solutions

L4 Transporter

Yes, you need to create custom region on the firewall,   

 

https://www.paloaltonetworks.com/documentation/71/pan-os/web-interface-help/objects/objects-regions

 

Note, it is only support IPv4 only as of PANOS 8.0

 

View solution in original post

2 REPLIES 2

L4 Transporter

Yes, you need to create custom region on the firewall,   

 

https://www.paloaltonetworks.com/documentation/71/pan-os/web-interface-help/objects/objects-regions

 

Note, it is only support IPv4 only as of PANOS 8.0

 

I haven't tried this yet but it certainly seems to be what I want.  Thanks for the reply.

  • 1 accepted solution
  • 2115 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!