- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
08-03-2011 03:04 AM
Hello,
Would anybody knows how to have a response page for Captive Portal redirect mode, in
active-active mode (PAN v4.0.4) ?
For example, through a loopback floating IP ?
Thanks
Christophe
08-03-2011 06:56 PM
Captive portal will work with the redirect IP as the floating IP address.
Dominic
08-03-2011 06:56 PM
Captive portal will work with the redirect IP as the floating IP address.
Dominic
09-11-2017 02:12 AM - edited 09-11-2017 02:24 AM
In PAN OS 7.1, is having a floating IP on the inside interface still the best way to configure the Captive Portal redirect page (in Active/Active HA)?
If this is the best way to go in an active-active setup, will enabling Response Pages on Interface Management profile that has been assigned to the actual interface (in our case aggregate sub-interface e.g. ae1.200) will suffice?
09-11-2017 02:20 AM - edited 09-11-2017 02:28 AM
yes, you should enable reponse pages on the interface as this is required to spawn the CaptivePortal page upon authentication requirement
a floating or shared IP is needed to provide the portal page with a 'socket' to which clients can connect
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!