SD-WAN - routing with variables

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

SD-WAN - routing with variables

L6 Presenter

Anyone been trying to setup SD-WAN routing with template variables? Surely that page in admin guide is completely wrong? Variables should be of type IP address. 

2 REPLIES 2

L3 Networker

Can you talk a bit more about how you've gone about this? The simplest way to configure SD-WAN is with the plugin, which saves you from having to use a template for routing. Can you outline your steps?

I am following the admin guide:

https://docs.paloaltonetworks.com/content/dam/techdocs/en_US/pdf/sd-wan/1-0/sd-wan-admin/sd-wan-admi...

 

At first I'm doing it without BGP and on page 58 you can either use Panorama template variables or define static routes directly on FW.

And the variables you make you use in destination field which must be of type IP address.

 

 

  • 3432 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!