Set zone via CLI does not work

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Set zone via CLI does not work

L0 Member

admin@firewall(active)# set vsys vsys1 zone test network layer3 ethernet1/17.66

Server error : layer3 'ethernet1/17.66' is not a valid reference


Cyber Elite
Cyber Elite

Hi @davistg ,


Did you create the zone first with the "set vsys vsys1 zone test" command?  Also, you will need to create interface ethernet1/17.66  as a layer3 interface if it doesn't already exist.  Then, your command should work.





Help the community: Like helpful comments and mark solutions.
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!