02-09-2022 02:48 PM
Hi,
I'm trying to get my PA220 up for my home use.
Right now it's plugged into a router, and I am plugging a laptop into the second ethernet port.
I went through instructions here:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFkCAK
My laptop gets an IP of 192.168.1.2, but when I try to connect to any site in Chrome, it times out.
Any recommendations on troubleshooting? I looked in the System logs for the PA220 and it's getting assigned an IP via DHCP, but other requests are not showing up in any of the logs tabs.
Help?
02-09-2022 07:32 PM
Look at your traffic logs on the firewall. Do you see the proper egress interface being recorded and do you see the NAT Source IP showing? This would help validate that you have routing and NAT setup properly at the very least.
02-10-2022 01:59 PM
So it turns out that plugging the firewall ethernet 1/1 into my router wasn't properly assigning DHCP. I have it into a switch and it went through.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
