Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Sharing a radius authentication-profile from panorama to a vsys-enabled firewall ?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Sharing a radius authentication-profile from panorama to a vsys-enabled firewall ?

L3 Networker

Hi,

When I define a shared radius-authentication-profile on panorama , this profile gets published into all my panorama managed firewall.

So far so good.

But when this gets pushed to a vsys-enabled firewall, then the authentication profile is pushed only into the vsys-contexts and not into the device context.

-> This has as result that the radius authentication profile in question can not be used as device authentication-profile for non-local administators on that firewall. It is simply not visible in the device-context, so it can not be selected.

Is this a bug are normal behaviour  ?

btw , we are on 4.0.3.

1 accepted solution

Accepted Solutions

L4 Transporter

Unfortunately, this is not a bug and happens to be a limitation of the current Panorama design. You are absolutely correct about the objects being pushed into vsys-contexts and not the "shared" device context. This is where the auth profile needs to be for selection inside Device > Setup for enabling RADIUS auth.

For now you will need to create the profile on each box where you wish to use this authentication mechanism.

We are looking at enchancing the Panorama architecture to support pushing objects to non-vsys contexts in a future release.

Sorry for the inconvienence.

View solution in original post

1 REPLY 1

L4 Transporter

Unfortunately, this is not a bug and happens to be a limitation of the current Panorama design. You are absolutely correct about the objects being pushed into vsys-contexts and not the "shared" device context. This is where the auth profile needs to be for selection inside Device > Setup for enabling RADIUS auth.

For now you will need to create the profile on each box where you wish to use this authentication mechanism.

We are looking at enchancing the Panorama architecture to support pushing objects to non-vsys contexts in a future release.

Sorry for the inconvienence.

  • 1 accepted solution
  • 2343 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!