11-21-2017 01:11 PM - edited 11-21-2017 01:11 PM
Hi everybody,
Is there any CLI command or log that show the time of the tunel VPN (phase 1, phase 2 or both of them) is up?
The commands:
show vpn ike-sa gateway <gateway name>
show vpn ipsec-sa tunnel <tunnel name>
It shows the lifetime since the last key was negotiated, but it doesn't show the total lifetime of activity of VPN tunnel.
Thanks
11-21-2017 02:32 PM
Hi Mate,
If ye have monitoring set up, the system log has tunnel up / tunnel down. Article below shows how to get details using cli
also has cool way to summarize it to clearly see how log a tunnel is up or down 🙂
cheers
Rob
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
