11-22-2013 02:46 AM
Since we update our Palo Ato2050 to 5.0.8 , we have detected that Palo ALto is working slowly
-Palo Alto needs a lot of time to show the logs and switch the tabs
-The interface web is very slow now
-Management CPU is always between 65-95% even with only one user connected.
Why it happens this in the new version?????
we have tried "debug software restart management-server and device-server" and it not solving anything.
11-22-2013 03:28 AM
I have tried with Chrome,Firefox an IE and its the same more or less maybe with Firefox a bit better but it needs like 15 seconds to do a query....
11-22-2013 05:15 AM
You should open a support ticket for further investigations.
11-25-2013 06:18 AM
Addresses Issues in 5.0.9:
57015—On a PA-2050, the dataplane board agent virtual memory usage was observed
to be steadily increasing.
so probably it's for You
11-25-2013 09:57 AM
You can run the following command to see which process is utilizing more memory and CPU.
show system resources follow
If you see some process to be high all the time you can open a case with support and work with them to investigate the issue. When opening a case attach the latest techsupport file from the device to the case.
05-27-2014 04:28 PM
We are also having the same issue on 5.0.5 on a pa -2050.
I have tried it on Chrome, Firefox and I.E. and chrome is the best but it is still very slow.
We seem to be sitting at at least 70% on the management cpu all the time with approximately 5000 sessions.
This is a long way short of the maximum 250 000 sessions.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!