SNI for GlobalProtect

Showing results for 
Search instead for 
Did you mean: 

SNI for GlobalProtect

L2 Linker



is there a way for globalprotect to only listen to a specific URL and forward all other FQDNs?

I already have webservers behind the palo listening to specific SNIs and would like to keep it this way.



L2 Linker

is a "bump" allowed? ^^

L0 Member

I also try to do it. I have 3 Palo's both with a GP gateways setup. I try to find the best way, still looking for a better solution. 



The firewall natively doesn't support this feature. You can reach out to your SE to get a feature request put in for this to be considered going forward. 

I am following this thread, facing same thing.

L0 Member

I couldn't solve this problem through the firewall and I still not find an alternative. I'd be grateful for your help.

I used a reverse proxy for the portal which works fine and entered a fqdn in the portal for the gateway...

unfortunately the globalprotect client simply resolves the IP and doesnt pass the SNI so it could be passed through a reverse proxy...
but maybe a clientless connection would work... might try that

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!