SNMP - OID RAM/HD Usage

cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP - OID RAM/HD Usage

L0 Member

Hello!!

I am using OP Manager to check my Palo Alto 3020 through snmp, but i don´t have the OID to check RAM/HD % usage, i downloaded all MIB from Palo Alto Page and uploaded to OP Manager. I haven´t seen the OID to check that resources.

 

Do you have the OID/MIB?

I used the "show system resources" and "show system disk-space" via cli and it worked. but i need to watch them through OP Manager

1 REPLY 1

Cyber Elite
Cyber Elite

@afonsecacr ,

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClaSCAS

Management Plane: 1.3.6.1.2.1.25.3.3.1.2.1

Dataplane: 1.3.6.1.2.1.25.3.3.1.2.2

 

You won't get a disk utilization as far as I'm aware from SNMP from your firewall. 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!