Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
11-15-2012 07:36 AM
I had recently configured a Cacti server to monitor my bandwidth usage of my PA-500. All was working fine for a few weeks until I worked with support to configure and enable QoS to monitor bandwidth on the PA-500 without actually implementing QoS. Since then my Cacti server is not displaying the SNMP information it was receiving from the PA-500.
Does anyone know if enabling QoS prevents the PA-500 from sending SNMP information?
11-15-2012 12:03 PM
What if you run a snmpwalk against the device starting at .1 ?
I mean in case the OID's changed.
11-16-2012 09:25 AM
Thanks for the tip mikand. I'll give that a try.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
