Software Upgrade

[ACPL_Manmeet]

Hi,

Is it possible to upgrade PAN-OS manually without licence ?

[reaper]

yes, this is possible

You will need to manually download the software image from the support portal and upload + install it on the firewall

[ACPL_Manmeet]

I have done the same steps but unable to ugrade to latest version .

After that i have register the device and upgrade autoatically .

Any inputs ?

BR//

Manmeet Singh 

[BPry]

@ACPL_Manmeet,

I somewhat remember issues being present if the firewall was never registered/upgraded prior attempting to perform a manual upgrade. Although I don't have a way of verifying that at the moment, I recall encountering a similar issue on a PA-500 at a customer who had simply never even registered the box and never did an upgrade while under support. 

[OtakarKlier]

Also make sure the dynamic updates are current. Some versions of code require newer app-threat signatures.

[ACPL_Manmeet]

@BPry -I Have observed same issue n PA-820 but still no getting guranteed solution over this .

Some are sayingpossible anad some are not .

[ACPL_Manmeet]

@OtakarKlier- I am asking for solution without registeration of device ...dynamic updates are possible after registeration of device only .

[OtakarKlier]

Hello,

You should be able to update the dynamic ones in a similar fashion as the software. Download it from the suport site and manually upload and install it.

Regards,

[ACPL_Manmeet]

@OtakarKlier ---Got your point ..thanks 🙂