SSL-VPN usage report

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

SSL-VPN usage report

Not applicable

I'm probably overlooking something obvious.. but I can't seem to find a way to generate a login / session report of SSL-VPN users.  Can anyone give a brother a hint?

1 accepted solution

Accepted Solutions

L7 Applicator

There is no "report" about SSL-VPN users/usage.. not yet.

Inside 4.0, there was a way that you could get into the WebUI, Network -> SSL-VPN, and then click on the "User Info" field, and then see active current users, and then historical to a point.

I am sorry that we do not have anything like that in 4.1, as NetConnect has been replaced by Global Protect.

You might be able to gather similar information in 4.1 for Global Protect as you could above for SSL-VPN users in 4.0.

I hope this helps a little.

LIVEcommunity team member
Stay Secure,
Joe
Don't forget to Like items if a post is helpful to you!

View solution in original post

4 REPLIES 4

L7 Applicator

There is no "report" about SSL-VPN users/usage.. not yet.

Inside 4.0, there was a way that you could get into the WebUI, Network -> SSL-VPN, and then click on the "User Info" field, and then see active current users, and then historical to a point.

I am sorry that we do not have anything like that in 4.1, as NetConnect has been replaced by Global Protect.

You might be able to gather similar information in 4.1 for Global Protect as you could above for SSL-VPN users in 4.0.

I hope this helps a little.

LIVEcommunity team member
Stay Secure,
Joe
Don't forget to Like items if a post is helpful to you!

Haven't yet moved to 4.x.  Still running 3.1.10 in production, but will be evaluating 4.1.1 in a smaller site because of existing issues with the NetConnect package that we're hoping Global Protect will resolve.

Thanks for the official word on that.  It would be nice if this is added at some point, so we can audit who is using the client VPN.  Smiley Wink

I created a work around where I email a report showing traffic on the VPN IP Range.  The VPN users once connected use a unigue IP Range so I just run a traffic report.  It is not ideal, but better than nothing

L0 Member

we use syslog which records username ip adress and time of connect / disconnect.. simple fast and efficient

  • 1 accepted solution
  • 4119 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!