Strange behavior

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Strange behavior

L0 Member

Hi,

 

facing issue where directed interfaces traffic is not working (from DMZ zone to Servers zone) , while from Inside ZONE to SERVERS is working fine despite inside users SVI is core switch then static route from core switch to paloalto while for users inside DMZ zone their gateway is FW itself (also DHCP ) and no routing is needed to reach SERVERS zone which also their gateway is FW.  policy same as   Inside ZONE to SERVERS, no NAT.

 

Note: pic attached 

1 REPLY 1

L4 Transporter

Hi there,

Have you confirmed that traffic flows from DMZ -> Servers actually matches the expected security policy rule? 
Test Policy Rules (paloaltonetworks.com)

 

In the traffic logs do you see the DMZ -> Server flows hitting any Deny rules?

For the devices in the Server security zone, do they have just a default route directing traffic to the firewall interface?

 

cheers,

Seb.

  • 540 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!