Switch Ports on HA device

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Switch Ports on HA device

L4 Transporter

hey

if i configure interface 1,2 to be L2 ports will the passive device allow traffic on those ports?

1 accepted solution

Accepted Solutions

For Layer 2 interfaces on passive device ports will be in shutdown state even though passive device port settings in HA are set to Auto; so no traffic is passed through passive device ports

View solution in original post

3 REPLIES 3

L7 Applicator

No, It would not pass through Passive device.

Thanks

For Layer 2 interfaces on passive device ports will be in shutdown state even though passive device port settings in HA are set to Auto; so no traffic is passed through passive device ports

thanks

  • 1 accepted solution
  • 2845 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!