- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
How much RAM does a PA-5250 have? And which threshold value should be defined for alarming in SNMP Monitoring?
And what other oid make sense to monitor and which hreshold value?
e.g. count of Sessions: Data Sheet 8.000.000, but what would be a appropriate threshold value?
Thanks a lot
The management plane has 32GB of which it uses 9GB. 90% usage would be alarming
the appropriate threshold of active sessions will depend on your traffic mix. I'd first establish a baseline and then set alerting if you go a considerable amount over that as that indicates an irregularity on your network vs trying to monitor the firewall when it maxes out because then you simply set it to 95%, but that doesn't tell you much
Hi and thanks for your response.
90% of 9 GB should be the alarming Threshold?
Our 5250 actually uses 4.5 GB of Memory
So i set
-w 6750 -c 8100 -l Memory -u MB
Max Sessions @ Datasheet 8.000.000
Our old 5050 max Sessions @ Datasheet 2.000.000 "died" at around 220.000 Sessions (average 900 byte per packet). No Limit of Datasheet has been reached.
So difficult to say and to baseline. I now just set warning to 800.000 and critical to 880.000.
Because of lack of performance and SNMP Monitoring features of our old PA-5050 we used Rest API for monitoring each core of the Firewall. But this API Request have slowed down the management plane, so we had to disable it.
So now we have the PA-5250.
Any other values (regarding to performance) to monitor?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!